Table of Contents
Advertisement
Chapter 3. Operation
Front Panel Operation
1 DTE PORT 1
1 CONFIG 2 DTE PORT 2
3 NETWORK PORT
4 CONTROL PORT
5 IP ROUTING
6 UNIT CONFIG
1 6
To choose a menu item, press the corresponding number or
alpha character on the keypad. Press Shift to activate menu
items with alpha selections. Scrolling to the selection by press-
ing either the Up or Down Arrow also activates the menu items.
The flashing cursor indicates which selection is activated. Press
Enter to select the item. The following steps and Figure 3-2
illustrate how to select FSU options:
1. Activate Configuration (CONFIG) using the arrow keys or
by pressing 1. The cursor will flash on the number next to
the activated selection. Press Enter.
2. Use the arrow keys to view submenu items.
3. Choose an item on the submenu such as DTE PORT 1.
4. Activate DTE PORT 1 using the arrow keys or by pressing 1.
Press Enter.
5. Activate PROTOCOL options using the arrow keys or by
pressing 1. Press Enter.
6. Press the arrow keys until the desired protocol is displayed.
Press Enter.
1 PROTOCOL
2 PHYS LYR OPT
3 PROTOCOL OPT
4 ADDRESS TABLE
FSU User Manual
1 PORT DISABLED
2 FRAME RELAY
3 SDLC <> LLC2
4 TRANSPARENT BOP
5 BISYNC
6 TRANSPARENT ASYNC
7 PPP SYNCHRONOUS
8 PPP ASYNC
9 SLIP
Figure 3-2
Example of Basic Menu Travel
61200.130L1-1
Advertisement
Table of Contents
