Interface Type (Int Type); Physical Layer Options (Phys Lyr Opt) - ADTRAN 1200130L1 User Manual

Interface Type (INT TYPE)

Physical Layer Options (PHYS LYR OPT)

61200.130L1-1
Select the connector type for the network interface. The choices
are V.35 and RS232. If the internal DSU is installed, the NET
selection will appear. Select NET to operate the internal DSU.
The following physical layer options are available when the
internal DSU is selected as the interface type:
Loop Rate
Select a loop rate of either 56k or 64k.
FSU User Manual
Chapter 7. Configuring the Network Port
VT 100 Network Port Configuration Menu
Figure 7-2
7 1