Selecting The Temperature; How To Fill The Water Tank - Fakir SKYGO Manual

Selecting the temperature

1. Check the ironing instructions on the garment to be ironed.
2. If the garment does not have any ironing instructions but you know the kind of fabric
in question, use the chart below.
3. Fabrics that have some kind of finish(polishing . wrinkles , contrasts....)can be ironed
at the lowest temperatures.
4. If the fabric contains several kinds of fibres ,always select the temperature applicable,
if an article contains 60% polyester and 40% cotton ,you must always choose the
temperature corresponding to polyester and without steam.
5. First classify the articles to be ironed according to the most suitable ironing
temperature : wool with wool, cotton with cotton, etc. as the iron heats up as fast as it
cools , start by ironing the articles requiring the lowest temperature such as those
made of synthetic fibres . Progress towards those that require the highest
temperatures.
6. Turn the temperature control until it is in front of the appropriate signal according to
the following:
· position for nylon and acetate
·· position for wool ,silk or mixures
··· position for cotton or linen (steam).

How to fill the water tank.

1. Unplug the iron.
2. Open the iron water inlet lid .(fig.1)
3. Fill the tank through the filling hole.(fig.1)
-If you have hard water ,it is advisable to use only distilled or demineralized water.
-do not use chemically de-limed water or perfumed
4. Do not store the iron with water in the tank.
SKYGO
19
GB