Selecting The Temperature; How To Fill The Water Tank - Fakir VEZUV Instruction Manual

Selecting the
temperature

How to fill the water tank

1. Check the ironing instructions on the garment to be ironed.
2. If the garment does not have any ironing instructions but
you know the kind of fabric in question, use the chart
below.
3. Fabrics that have some kind of finish(polishing . wrinkles,
contrasts....)can be ironed at the lowest temperatures.
4. If the fabric contains several kinds of fibres ,always select
the temperature applicable ,if an article contains 60%
polyester and 40% cotton ,you must always choose the
temperature corresponding to polyester and without steam.
5. First classify the articles to be ironed according to the most
suitable ironing temperature : wool with wool, cotton with
cotton, etc. as the iron heats up as fast as it cools , start by
ironing the articles requiring the lowest temperature such
as those made of synthetic fibres . Progress towards those
that require the highest temperatures.
6. Turn the temperature control until it is in front of the
appropriate signal according to the following:
·
··
···
1. Unplug the iron.
2. Set the steam button to dry ironing .(fig.1)
3. Fill the tank through the filling hole.(fig.2)
-If you have hard water ,it is advisable to use only distilled
or demineralized water.
-do not use chemically de-limed water or perfumed
4.Do not store the iron with water in the tank.
(Fig. 1)
OPERATING
position for nylon and acetate
position for wool ,silk or mixures
position for cotton or linen (steam).
(Fig. 2)
GB
(Fig. 3)
17