thomann Stairville LED-Commander 16/2 User Manual page 19

Saving settings externally
Loading saved settings
MIDI value Function
... ...
126 BLACK OUT
You can save various device settings to a USB drive.
1. Connect your USB drive to the device's USB port.
2.
Hold [MODE] and down for two seconds until the display shows 'Press fixture
½ key save file' .
3. Press the button of the FIXTURE channel whose settings you wish to save.
ð The progress of the saving operation is shown on the display.
All channel settings are stored together in the file 'led-commander 16-2' on
the USB drive.
You can load saved device settings from a USB drive to the device memory.
1.
Connect your USB drive containing the saved settings values to the device's
USB port.
2.
Hold [MODE] and down for two seconds until the display shows 'Press fixture
½ key loader file' .
ð The LEDs of the channels for which settings were found on the USB drive
light up.
3. Press the button of the FIXTURE channel whose settings you wish to load.
ð The progress of the loading operation is shown on the display. The display
then returns to its previous state.
LED-Commander 16/2
Operating
Explanation
...
BLACK OUT function active
19