thomann Stairville LED-Commander 16/2 User Manual page 10

Connections and operating elements
8 [MODE]
Button to switch the operating mode. The associated LED indicates the active operating mode: Auto, music or
manual.
9 [SPEED]
Slider to manually adjust the chase speed during playback.
10 [FADE]
Slider to manually adjust the fade speed during playback.
11 [BLACKOUT]
Button to turn the BLACKOUT function on and off. The associated indicator LED shows whether the respective
channel is active (LED flashes) or deactivated (LED off).
12 [FULL ON]
Button to turn the FULL ON function on and off. The associated indicator LED shows whether the respective
channel is active (LED flashes) or deactivated (LED off).
13 [PATCH | CLEAR]
Press this button for three seconds to change the channel assignments. As soon as the associated indicator LED
lights up, the channels can be reassigned. Press the button again for three seconds to exit the mode. Press this
button briefly to zero all applied DMX values.
14 [PROGRAM | RECORD]
Press this button for three seconds to enable the Programme mode. The associated indicator LED shows whether
the mode is active (LED flashes) or deactivated (LED off). Press the button again for three seconds to exit the mode.
15 [MIDI | IN SET]
Press this button for three seconds to open the menu for assigning the MIDI inputs. As soon as the associated indi‐
cator LED lights up, the MIDI inputs can be assigned using the SPEED control or the
button again for three seconds to exit the mode.
16 [TAP | DEL]
With this key you can delete and undo entries.
17 [TILT]
Press this button to control the inclination of assigned moving heads with the joystick (18). The associated indi‐
cator LED flashes as long as the TILT mode is active.
18 Joystick for controlling the connected moving heads. To activate the joystick function, either the TILT (18) or the
PAN mode (19) must be activated.
19 [PAN]
Press this button to control the rotation of assigned moving heads with the joystick (18). The associated indicator
LED flashes as long as the PAN mode is active.
20 [AUX1 | AUX2]
These buttons let you switch the AUX channels on (associated LED lights up) or off (LED off).
21 [DIMMER]
Slider with associated flash or selection button for manual setting of the virtual DIMMER function (if activated), or
channel control for the assigned DMX channel.
10
DMX controller
and buttons. Press the