thomann Stairville LED-Commander 16/2 User Manual page 18

Operating
Renaming Flash functions
MIDI functions
18
1. Switch off the device.
½ RECORD], [DIMMER] and [PATCH ½ CLEAR] down simultane‐
2.
Hold [PROGRAM
ously and switch the device back on.
ð After two seconds, the following message appears on the display:
3.
Press the Flash button of the function you wish to rename.
4.
On the display, the name can now be changed using the joystick (move to the
right/left moves the cursor, move up/down changes the relevant letters of the
alphabet).
5.
Repeat steps 3 and 4 to rename any other Flash functions.
6.
Confirm the new designation(s) with [PROGRAM
7.
Switch the device off and back on again to work with the new settings.
The MIDI function allows you to connect two DMX controllers or to control the con‐
troller via a MIDI keyboard.
½ IN SET] down for three seconds to switch to MIDI mode.
1.
Hold [MIDI
2.
Use and to select a MIDI channel (1 to 16).
3. ½ IN SET] down for three seconds to exit MIDI mode.
Hold [MIDI
MIDI value Function
0-15 SCENE1-16
16-31 CHASE1-16
32 MANUAL
33 MUSIC
34 AUTO
35 AUX1
36 AUX2
37
38
39 TAP
DMX controller
½ RECORD].
Explanation
Switch scenes 1-16 on/off
Switch chaser sequences 1-16
on/off
Manual sequence control
Music-controlled sequence
Automatic sequence control
Switch AUX1 on/off
Switch AUX2 on/off
Manual sequence control
Manual sequence control
Automatic sequence control