Table of Contents
Advertisement
1.0
Introduction
M3A-8K02 is a development board for the Renesas USB Full-Speed MCU 38K0/38K2 Group (8-bit)
M3A-8K02 comes with the USB function, USB hub, and many key peripheral circuits enabling faster and more
efficient application development.
Note 1: 38K0 Group devices come with the USB Function; 38K2 Group devices come with the USB function as well as the USB hub.
M3A-8K02 consists of 4 boards: G01/G02/G03/G04. Each board is described in detail below.
* G01
This is the main M3A-8K02 board. It provides the USB hub and other peripheral circuits necessary for the
development process.
* G02
This is the RFS top board ("RFS board" hereon) with built-in sockets for mounting the debugger
(M38K09RS/M38K29RFS). G02 is mostly used for program evaluation with the debugger.
* G03
This is the Flash Chip (M38K29F8HP) top board ("Flash-chip board" hereon), and is normally used for
program verification with flash chips.
* G04
This is the external universal board, which enables circuit expansions for G01. This can be used for
integrating circuits not included on G01.
The M3A-8K02 comes bundled with all four boards. Each board can also be purchased separately under the
corresponding part number (M3A-8K02G02/G03/G04).
M3A-8K02 -> M3A-8K02
2
RENESAS
USB F
38K0/38K2
G01
(Main Board)
G02
(RFS Board)
G03
(Flash-chip Board)
G04
(External Universal Board)
ull-Speed Microcomputers
Group
M3A-8K02
.
Note 1
Advertisement
Table of Contents
