Table of Contents
Advertisement
1.3
Top Boards G02/G03
Top boards G02 and G03 allow the user to perform either debug evaluations or chip testing with a simple
switch of a board. Attach G02 (RFS board) to the main board in order to connect a debugger, or attach G03
(Flash-chip board) for chip testing.
G02 (RFS board) provides an RFS socket in the center of the board for attachment of the emulation chip for
debug evaluations. To perform an evaluation, insert either M38K29RFS or M38K09RFS into the socket and
connect the debugger (see Figure 1.3(2)).
G03 (Flash-chip board) provides a socket in the center of the board for attachment of M38K29F8HPL for
Flash chip operational verification. Because the Flash chip already contains the rewriting control program, the
application software can be directly downloaded to the Flash-chip board and operational verification performed
(for more details concerning Flash-chip reprogramming, see "1.11 Flash-Chip Reprogramming").
M38K29F8HPL can also run 38K0 application software.
Emulation Chip Socket
Figure 1.3(1) Top Views of G02 and G03
RENESAS
USB F
ull-Speed Microcomputers
38K0/38K2
(38K2)Flash Chip
(38K2) rewriting
control program
Group
M3A-8K02
5
Advertisement
Table of Contents
