Battery Installation; Part 4: How To Use; Water Flow Trial - Modena Rapido Series User Manual Book

Battery Installation

This water heater uses two batteries with R20S
type and D1.5V size. During the installation, open
the cover of battery box first; install the batteries
according to the positive and negative poles;
then, re-cover the box.
NOTE
Tighten the batteries fast unless they would
fall down.

Water Flow Trial

Turn off the gas switch, fully open the cold water valve and hot water
valve. If cold water flows out of the hot water valve, close both hot and
cold water valves.
Main Valve of Hot Water
Hot Water

PART 4: HOW TO USE

Flame Observation
Water Temperature
Controller Knob
Gas Controller Knob
Outlet
Window
Main Valve of
Cold Water Inlet
Gas Switch
11
Batteries
Main Valve
of Hot
Water Inlet