F3: Set - Tripp Lite NetDirector B024-DPU08 Owner's Manual

9. OSD Operation

9.6.3 F3: Set

Clicking or pressing [F3] activates the Set function. This function allows the administrator and each user
to set up their own working environment. A separate profile for each is stored by the OSD and is activated according
to the username that was provided during login.
To change a setting:
1. Click it or move the highlight bar to it, then press [Enter].
2. After you select an item, a submenu with further choices appears. To make a selection, either click it or move the
highlight bar to it, then press [Enter]. A check mark ( √ ) appears before the selected choice to indicate which one
it is. The settings are explained in the following table:
Setting
OSD Hotkey
Port ID Display Position
Port ID Display Duration
Port ID Display Mode
Function
Selects which hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the [Ctrl] key combination may conflict with programs running on the
computers, the default is the [Scroll Lock] combination.
Allows each user to customize the position where the port ID appears on the
screen. The default is the upper left corner, but users can choose to have it appear
anywhere on the screen.
Use the mouse or the arrow keys plus Pg Up, Pg Dn, Home, and End (on the
numeric keypad with Num Lock off). Arrow keys move the position one space at
a time. Pg Up and Pg Dn brings the position to the top or bottom. Home and End
brings the position to the rightmost and leftmost of the screen. To position the port
ID display, single-click or press [Enter] to lock the position and return to the Set
submenu.
Determines how long a port ID displays on the monitor after a port change has taken
place. The choices are: 3 Seconds (default) and Always Off.
Selects how the port ID is displayed:
The port number plus the port name (Port Number + Port Name) (default), the port
number alone (Port Number) or the port name alone (Port Name).
27