Osd Main Screen; Osd Main Screen Headings - Tripp Lite NetDirector B024-DPU08 Owner's Manual

9. OSD Operation

9.3 OSD Main Screen

When you invoke the OSD, a screen similar to the one below appears:
Notes:
• The diagram depicts the administrator's main screen. The user main screen does not show the F4 and F6 functions, since
these are reserved for the administrator and cannot be accessed by users.
• The OSD always starts in list view, with the highlight bar at the same position it was in the last time it was closed.
• Only the ports that have been set accessible by the administrator for the current logged in user are visible.
• Enable Mouse Emulation to operate the OSD using mouse. When the Mouse Emulation is disabled, you can only operate the
OSD using the keyboard.
• To enable the Mouse Emulation via OSD, refer to "Mouse Emulation" in the table in section 9.6.4 F4: Admin for details.
• To enable the Mouse Emulation via hotkeys, see section 10.14 Mouse Emulation Control.
• If the port list is collapsed, click on a switch number or move the highlight bar to it, then press the [Enter] key to expand the list.
Similarly, to collapse a switch's port list, click on the switch number or move the highlight bar to it, then press the [Enter] key to
collapse the list.

9.4 OSD Main Screen Headings

PN This column lists the port ID numbers for all the KVM ports on the installation. The simplest method to
access a particular computer is move the highlight bar to it, then press [Enter].
QV If a port has selected for quick view scanning, a check mark ( √ ) displays in this column.
PW
The computers that are powered on and are online have a sun symbol
NAME If a port has been given a name, its name appears in this column.
24
in this column.