Internal Integers (Adi) Commands (Acknowledged); Internal Floating Point (Adf) Commands (Acknowledged) - Danfoss VLT 2800 Manual

Internal Integers (ADI) Commands (Acknowledged)

ACK 1 - 6
ACK 1 - 6
ACK 2 - 6
ACK 7 2 6
ACK 7 3 6

Internal Floating Point (ADF) Commands (Acknowledged)

ACK 1 - 5 1-42
ACK 1 - 5 1-42
ACK 2 - 5 1-42
ACK 2 - 5 1-42
ACK 7 2 5 1-42
ACK 7 3 5 1-42
MG.90.C1.02 - VLT is a registered Danfoss trademark
1 1 Byte
1 2 Integer
1 - Integer
1 - Integer
1 - -
1 Byte Read Internal
Parameter of
object type float
2 Float Read Internal
Parameter of
object type float
- Float Write Internal
Parameter of
object type float
- Float Write Internal
Parameter of
object type float
- Float Override
Internal
Parameter of
object type float
- - Override
Release
VLT ® 2800 Metasys N2
Read Internal -
Parameter of
object type integer
(16 bit)
Read Internal -
Parameter of
object type integer
(16 bit)
Write Internal -
Parameter of
object type integer
(16 bit)
Override Internal -
Parameter of
object type integer
(16 bit)
Override Release -
- Read Object Status attribute
associated with each individual
point
- Read Current Value attribute
associated with each individual
point
- Write to Current Value attribute
associated with each individual
point.
- Write to Current Value attribute
associated with each individual
point.
- Write to internal parameter current
value (set-up parameters for VLT).
- Set the current value, the value
that it was before the 1. Override
Command was issued
Read Object Status attribute
associated with each
individual point.
Read Current Value
attribute associated with
each individual point.
Write Current Value
attribute associated with
each individual point.
Write to Internal Parameter
current value (setup
parameter for VLT)
Set the current value, the
value that it was before 1.
Override Command was
issued.
17