Analog Output (Ao) Commands (Not Acknowledged) - Danfoss VLT 2800 Manual

Analog Output (AO) Commands (Not Acknowledged)

NAK 1 - 3
NAK 1 - 3
NAK 2 - 3
NAK 2 - 3
NAK 2 - 3
NAK 2 - 3
Error code 11 is used because attributes are considered as fields/records in the point map database.
12
1-2 4 Float Read Analog
Output
1-2 5 Float Read Analog
Output
1-2 2 Byte Write Analog
Output
1-2 3 Float Write Analog
Output
1-2 4 Float Write Analog
Output
1-2 5 Float Write Analog
Output
VLT ® 2800 Metasys N2
11 Read Low Linear Ranging
Parameter attribute associated with
each individual point.(JCI use only)
11 Read High Linear Ranging
Parameter attribute associated with
each individual point.(JCI use only)
11 Object Status not writeable.
11 Write to Current Value structure
attributes associated with each
individual point. (N2 does not
support this, override function must
be used)
11 Write Debouncing Value in msec
attribute associated with each
individual point. (JCI use only)
11 Write Accumulator value attribute
associated with each individual
point. (JCI use only)
MG.90.C1.02 - VLT is a registered Danfoss trademark