Binary Output (Bo) Commands (Not Acknowledged) - Danfoss VLT 2800 Manual

Binary Output (BO) Commands (Not Acknowledged)

NAK 1 - 4
NAK 1 - 4
NAK 2 - 4
NAK 2 - 4
NAK 2 - 4
Error code 11 is used because attributes are considered as fields/records in the point map.
16
1-9 6 Integer Read
Binary
Output
1-9 7 Integer Read
Binary
Output
1-9 2 Byte Write
Binary
Output
1-9 6 Integer Write
Binary
Output
1-9 7 Integer Write
Binary
Output
VLT ® 2800 Metasys N2
11 Read Interstage on delay attribute
associated with each individual point.
(JCI use only)
11 Read Interstage off delay attribute
associated with each individual point.
(JCI use only)
11 Object Status not writeable.
11 Write Interstage on delay attribute
associated with each individual point.
(JCI use only)
11 Write Interstage off delay attribute
associated with each individual point.
(JCI use only)
MG.90.C1.02 - VLT is a registered Danfoss trademark