Binary Output (Bo) Commands (Acknowledged) - Danfoss VLT 2800 Manual

Binary Output (BO) Commands (Acknowledged)

ACK 1 - 4
ACK 1 - 4
ACK 2 - 4
ACK 7 2 4
ACK 7 3 4
ACK 1 - 4
no
action
ACK 1 - 4
no
action
ACK 1 - 4
no
action
ACK 2 - 4
no
action
ACK 2 - 4
no
action
ACK 2 - 4
no
action
ACK, 7 7 4
no
action
ACK, 7 8 4
no
action
MG.90.C1.02 - VLT is a registered Danfoss trademark
1-9 1 Byte
1-9 2 Byte
1-9 1 Byte
1-9 - Byte (0/1)
1-9 - -
1-9 3 Integer
1-9 4 Integer
1-9 5 Integer
1-9 3 Integer
1-9 4 Integer
1-9 5 Integer
1-9 - -
1-9 - -
VLT ® 2800 Metasys N2
Read Binary - Read structure attributes
Output associated with each individual
point.
Read Binary - Read structure attributes
Output associated with each individual
point.
Write Binary - Write to Object Configuration
Output attribute associated with each
individual point.
Override - Write to binary output current
Binary Output state (Tech 500 control word).
Override - Set the current value, the value
Release that it was before the 1.
Override Command was issued
Read Binary - Read Minimum On-time
Output attribute associated with each
individual point.
Return value = 0
Read Binary - Read Minimum Off-time
Output attribute associated with each
individual point.
Return value = 0
Read Binary - Read Maximum Cycles/Hour
Output attribute associated with each
individual point.
Return value = 0
Write Binary - Write Minimum On-time
Output attribute associated with each
individual point.
Write Binary - Write Minimum Off-time
Output attribute associated with each
individual point.
Write Binary - Write Maximum Cycles/Hour
Output attribute associated with each
individual point.
Write Binary - Optional command for slave
Output devices. Only used for N2
Attributes commissioning purposes.
Read Binary - Optional command for slave
Output devices. Only used for N2
Attributes commissioning purposes.
15