Binary Input (Bi) Commands (Not Acknowledged) - Danfoss VLT 2800 Manual

Binary Input (BI) Commands (Not Acknowledged)

NAK 1 - 2
NAK 1 - 2
NAK 2 - 2
NAK 2 - 2
NAK 2 - 2
Error code 11 is used because attributes are considered as fields/records in the point map database.
14
1-72
3 Integer
1-72
4 Integer 32
1-72
2 Byte
1-72 3 Integer
1-72 4 Integer 32
VLT ® 2800 Metasys N2
Read Binary 11 Read Debouncing Value in
Input Msec attribute associated with
each individual point. (JCI use
only)
Read Binary 11 Read Accumulator Value
Input attribute associated with each
individual point. (JCI use only)
Write Binary 11 Object Status not writeable.
Input
Write Binary 11 Write Debouncing Value in
Input msec attribute associated with
each individual point. (JCI use
only)
Write Binary 11 Write Accumulator value
Input attribute associated with each
individual point.(JCI use only)
MG.90.C1.02 - VLT is a registered Danfoss trademark