Panasonic SF4-AH Series Instruction Manual page 65

Device status
Beams other
than the top end
blocked
Beams other
than the bottom
end blocked
Time chart
Notes: 1) Since the color of the operation indicator changes according to the ON / OFF state of the control
output (OSSD 1, OSSD 2), the operation indicator is marked as OSSD on the sensor.
2) This is for emission in normal mode. In case of emission in short mode, lights up in orange.
3) In case of series connection, 20ms or less.
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V
Emitter
The top most beam-axis
alignment indicator:
blinks in red
Operation indicator:
lights up in red
The bottom most beam-axis
alignment indicator:
blinks in red
Operation indicator:
lights up in red
Indicators
Receiver
The top most beam-axis
alignment indicator:
blinks in red
OSSD indicator:
lights up in red
The bottom most beam-axis
alignment indicator:
blinks in red
OSSD indicator:
lights up in red
Control output
OSSD1
OSSD 2
OFF
- 65 -