Panasonic SF4-AH Series Instruction Manual page 43

Table of Contents

<Mounting of U-shaped side mounting intermediate supporting bracket and L-shaped

intermediate supporting bracket>

1. Place the retaining plate on the U-shaped side mounting supporting bracket and

temporarily tighten them with the pan head screw [M3 (length 10mm)].

2. Temporarily tighten the L-shaped intermediate supporting bracket to the U-shaped side

mounting supporting bracket with the hexagon-socket-head bolt with washer [M4 (length

10mm)] for position adjustment.

3. Clamp the sensor main body with the U-shaped side mounting supporting bracket and

completely tighten the pan head screw that secures the retaining plate. (Tightening

torque: 0.4N·m or less)

After beam-axis alignment, completely tighten the bolt that secures the U-shaped side

mounting supporting bracket and the L-shaped intermediate supporting bracket.

(Tightening torque: 1.8N·m or less)

For mounting the receiver, the U-shaped side mounting intermediate supporting bracket is mounted

upside down.

- 43 -

Table of Contents

Troubleshooting