Panasonic SF4-AH Series Instruction Manual page 12

<Display section>
Emitter
Receiver
Notes: 1) Since the color of the operation indicator changes according to the ON / OFF state of the control output
(OSSD 1, OSSD 2), the operation indicator is marked as [OSSD] on the sensor.
2) The threshold where the control output (OSSD 1, OSSD 2) changes from OFF to ON is applied as '100%
incident beam intensity'.
3) The blanking function is set by using the handy-controller (SF-HC) (optional). Please purchase the
handy-controller separately.
4) The description given in [ ] is marked on the sensor.
- 12 -
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V