Panasonic SF4-AH Series Instruction Manual page 33

 Cable for series connection: 2 pcs./set
(common for emitter and receiver)
Model No. Cable length
SF4A-CSL02 200mm
SF4A-CSL05 500mm
SF4A-CSL10
1,000mm
SF4A-CSL30 3,000mm
 Side mounting bracket: 4 pcs./set
 U-shaped side mounting intermediate supporting bracket: 2 pcs./set
[U-shaped side mounting supporting bracket, retaining plate, 2 pcs. each]
 L-shaped intermediate supporting bracket: 2 pcs./set
M4 (length 10mm)
hexagon-socket-head bolt:
2 pcs., M3 (length 10 mm),
pan head screw: 2 pcs.,
Nut: 2 pcs
 Center mounting bracket: 4 pcs./set
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V
Used to connect sensors in series.
Common for emitter and receiver with caps.
Model No.
MS-SF2N-3 Used for side mounting of sensors.
Model No.
MS-SF2N-4 SF4-AH□
MS-SF4A-H4 SF4-AH□-H
Note: When installing this device having 36 beam channels or more at places where
vibration is intense, use the necessary number of intermediate supporting
brackets at the specified positions.
1 set: SF4-AH36(-H), SF4-AH40(-H)
2 sets: SF4-AH48(-H)
3 sets: SF4-AH56(-H), SF4-AH64(-H), SF4-AH72(-H)
4 sets: SF4-AH80(-H)
5 sets: SF4-AH88(-H), SF4-AH96(-H)
Model No.
Used to install the U-shaped rear (side) mounting intermediate
MS-SF2N-L
supporting bracket on the wall side, etc.
Notes: 1) The same quantity of the intermediate supporting bracket as the U-shaped
side mounting intermediate supporting bracket is required.
1 set: SF4-AH36(-H), SF4-AH40(-H)
2 sets: SF4-AH48(-H)
3 sets: SF4-AH56(-H), SF4-AH64(-H), SF4-AH72(-H)
4 sets: SF4-AH80(-H)
5 sets: SF4-AH88(-H), SF4-AH96(-H)
2) Since L-shaped intermediate supporting bracket is common for rear mounting
and side mounting, in case of side mounting of sensor, the enclosed
MS-SF2N-L can be used.
Model No.
Used for one-point rear mounting.
MS-SF2N-5
Convenient for mounting on an aluminum frame.
Note: When using the intermediate supporting bracket, it is not possible to mount this
center mounting bracket to the aluminum flame.
Remarks
Remarks
Remarks
Used to hold the sensor at the intermediate
position for side mounting.
Remarks
Remarks
- 33 -