1-4 Applicable Standards / Regulations
This device complies with the following standards / regulations.
<EU Directives>
EU Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
<European Standards>
EN 61496-1 (Type 4), EN 55011
EN ISO 13849-1: 2008 (Category 2, PLe)
<International Standards>
IEC 61496-1/2 (Type 4), ISO 13849-1: 2006 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508 (SIL3)
<Standards in US / Canada>
ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2)
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
<Regulations in US>
OSHA 1910.212 (Note), OSHA 1910.217(C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Regarding EU Machinery Directive, a Notified Body, TUV SUD, has certified with the type
examination certificate.
With regard to the standards in US / Canada, a NRTL, UL (Underwriters Laboratories Inc.)
has certified for C-UL US Listing Mark.
<Reference>
The conformity to JIS, OSHA and ANSI for this device has been evaluated by ourselves.
The C-CL US Listing Mark
This device conforms to the EMC directive and the Machinery directive. The
sensor main body indicates that this product conforms to the EMC directive.
In Japan, never use this device as a safety equipment for any press machine or
When this device is used in a place other than the places shown in the table
- 8 -
indicates compliance with both Canadian and U.S. requirements.
shearing machine.
above, be sure to confirm the standards or regulations applicable in each region
or country before use.
© Panasonic Industrial Devices SUNX Co., Ltd. 2013 MJE-SF4A No.0038-55V
mark on the