Panduit PLA-100 Operation Manual page 29

© Panduit Corp. 2020
The Module Status indicates the general state of the PLA SYSTEM. A table of Module
Status states is below. Minor Faults may be corrected by a Reset. Major faults may be
corrected by using the Restore Factory Defaults. If normal operation does not follow after a
"Restore", please contact Panduit for technical support or service.
Wrapper Status
Disconnected
Running
Idle
Error
Dispenser Status
Running
Error
Rev. 02
PLA-100, PLA-H100
Description
Wrapper is not connected to the dispenser
Wrapper is operating correctly
Waiting
Wrapper has a fault
Description
Dispenser is operating correctly
Dispenser has a fault
Page 28 of 34
1 / 2021