© Panduit Corp. 2020
7B: PLA-H100
1. PLA-H100: Applicator Head (1) See Figure 9B
2. 00129EOO: Applicator Head Spyder Coupler (1)
The Benchtop Label Applicator primary components are shown and labeled in Figure 10 for
reference throughout this guide.
Figure 10: Benchtop Label Applicator Mechanisms and Components
Take-up Spool
User Interface
Media Length
Selector
Applicator Head
8: MEDIA SETUP
Labels are printed in bulk and wound onto the label spool with the labels facing outward prior to
installation on the Benchtop Label Applicator.
Figure 11:
Customer Print
Direction
9: INSTALLING THE APPLICATOR HEAD
Power must be off when installing the Applicator Head onto the Dispenser. Ensure that the drive
coupling spacer is in place in the Dispenser. Align the Applicator Head using the base plate shoulder
Rev. 02
PLA-100, PLA-H100
Dispenser
Page 13 of 34
Pre-Printed
Labels
Peel Plate
Applicator Head Cable
1 / 2021