Web Browser Settings - Panduit PLA-100 Operation Manual

PLA-100, PLA-H100
© Panduit Corp. 2020
13F: WEB Browser Settings
See Username and Password on Page 29 for username and password
authentication.
MODEL
The Model displays the Model Number of this PLA SYSTEM (PATGEN4.0).
RESET
The Reset button can be used to restart the PLA SYSTEM in the event of a Minor or
Major Fault, or after a change to Network Settings, or performing a Restore Factory
Defaults or Firmware Update.
SERIAL NUMBER
The Serial Number displays the Serial Number of this PLA SYSTEM device, which is
also printed onto a label on the side of the unit.
1 / 2021
Rev. 02
Page 31 of 34