Page 1
Read this document carefully to use this product safely and correctly. If your product is faulty, please read the warranty card on the website. Please visit us at www.panduit.com, or contact the Panduit customer service team, for additional support. You can also download the latest version of this Operator's Manual from the website.
MP75 PRINTER Operator's Manual Before use 1. Installing batteries 2. Installing a tape cartridge 1. Remove the slack of the ink ribbon. Prepare six AA alkaline batteries. 1. Open the battery cover/cassette door on the back of the printer. 2. Open the battery cover/cassette door on the back of the printer. 2.
MP75 PRINTER Operator's Manual Editing characters 6. Printing labels Press character keys and enter text. 1. Press sPart Names and Functions The length of the label to print and the number of prints appear, Text is entered from the cursor position. sDisplay and printing starts.
MP75 PRINTER Operator's Manual Useful functions Creating labels with serial numbers (Sequence This section explains various functions that will help you create labels. number) Changing the font size 1. Press 2. Select a line layout with [ ] [ ] , and press "Equal": Applies the same font size.
Page 6
MP75 PRINTER Operator's Manual Creating a label with a special form Adding a frame To create labels with a special form, a message confirming that 1. Press the text will be deleted may appear when is pressed. Press 2. Select an item with [ ] [ ] , and press to delete the current text and to show the special form.
MP75 PRINTER Operator's Manual Display Settings ("Display" menu) Creating a ribbon The following are the settings to make operation easier. 1. Press Backlight 2. Select "8.Ribbon" using the cursor keys, then press Turns the backlight of the display on or off. 3.
An error occurred in the motor operation. Turn the power off Characters are not printed properly. once, then turn it back on. If the same message appears, turn the power off and contact the Panduit Identification Technical Is the tape cartridge correctly set? Support.