Table of Contents
Advertisement
© Panduit Corp. 2020
12: USER INTERFACE AND ERROR DESCRIPTIONS
Error Location
Power Indicator
Reset Button
Figure 28: User Interface
The user interface for the Panduit Label Applicator system provides users with operational status. On
power-up the user interface illuminates the Power and "Caution" until the initialization of all hardware is
completed. At the end of the Power up sequence the user interface will transition to either "Ready" or
"Error".
Power
System Ready
ON
System Error
ON
If the system is in error during initialization or normal operation, the Error status
indicator on the User Interface along with 1 of the 5 extended error location LED's shown
in Figure 10 will be illuminated.
Note:
When any mechanisms are moving the "Caution" LED will be illuminated and flashed.
Problem:
power available to electronics while power is turned on.
No
Solution: Remove power cord. Remove fuse cover. Check fuse and replace per Electrical
Specifications in section 6A. Re-install fuse cover. Attach power cord. Toggle power switch to turn
the unit on. If this does not correct the issue, please contact Panduit Customer service.
Rev. 02
PLA-100, PLA-H100
Take-Up
Error
Peel & Present
Error
Ready
Caution
Motors Moving
Applicator Head
Error
Error
Reset Button
Ready
OFF
ON
ON
OFF
Page 23 of 34
Media
Detect Error
Figure 29: Error Location Indicators
Error Location
OFF
ON
Media Error
Caution/Waiting
OFF
OFF
1 / 2021
Advertisement
Table of Contents
Troubleshooting
