5: Fcc Emission Classifications; 6: Technical Specifications; Electrical Specifications - Panduit PLA-100 Operation Manual

© Panduit Corp. 2020
2. DO NOT operate near anyone's face.
3. DO NOT operate without a wire bundle present on the convey.
4. ONLY OPERATE THE PANDUIT LABEL APPLICATOR SYSTEM IN A CLEAN, DRY, INDOOR
ENVIRIONMENT

5: FCC EMISSION CLASSIFICATIONS

USA FCC Emissions for Class B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesirable operation.
Canadian Emissions for Class B
This Class "B" digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations.
Cet appareil numérique de la classe "B" respecte toutes les exigencies du Règlement sur le matériel
brouilleur du Canada.
European Emissions Warning for Class B
Product is not intended for use in a residential environment. Use of this product in residential areas may
cause electromagnetic interference.
The information contained in this manual is based on our experience to date and is believed to be
reliable. It is intended as a guide for use by persons having technical skill at their own discretion and
risk. We do not guarantee favorable results or assume any liability in connection with its use.
Dimensions contained herein are for reference purposes only. For specific dimensional requirements
consult the factory. This publication is not to be taken as a license to operate under, or a
recommendation to infringe any existing patents.

6: TECHNICAL SPECIFICATIONS

6A: Electrical Specifications
ITEM
Line Voltage (PDM Dispenser)
Power
Phase
Line Fuse(s)
Power to Wrapper Head
Note: This unit includes a protective earthing design and has been testing per IEC 60601-1. and EMI/RFI filters
however, it is possible that infrequent electrical phenomena may cause tool function to be temporarily interrupted. This
interruption can be corrected by turning the tool "off" (removing the label if necessary), and then back "on" again.
Rev. 02
PLA-100, PLA-H100
MODEL
All 100 / 115 / 230 V (50/60 Hz)
All 200 W
All Single Phase
F1 2.5 A, 250VAC (1) – Line Power
F2 2.5 A, 250VAC (1) – Neutral Power
All Panduit Part Number (for both fuses): CA29756B01
All Logic -- 5 V
Page 11 of 34
DESCRIPTION
0.50 mA
1 / 2021