13: Web Browser Interface; Status Via Pc; Connecting To The Pla System - Panduit PLA-100 Operation Manual

PLA-100, PLA-H100
© Panduit Corp. 2020
Solution: Replace static Brushes on applicator head. Contact Panduit Service Center.
Problem: Label underfed due to wrong selector position for label chosen.
Solution: Check to determine that label part number and selector position are coordinated
correctly.
Problem: Wear on the applicator head belt causing loose and/or telescoping wrap issues.
Solution: Replace wrapper core as needed. Contact Panduit Service Center.

13: WEB BROWSER INTERFACE

The PLA SYSTEM web server has been tested with Microsoft Internet Explorer 11 and
Google Chrome 77.X, running on Windows 7 and Windows 10 operating systems. Other
web browsers and operating systems may work as well, but proper operation is not
guaranteed. The appearance of the WBI can be adjusted through the web browser settings.
13A: Status Via PC
Status information for the PLA SYSTEM may be accessed by running a web browser on a
PC that is connected to the same network to which the PLA SYSTEM is connected. The
Network is accessed via the Ethernet port located on the back of the dispenser. The
connection is a standard RJ-45 type receptacle. This port should be connected to a router
running a DHCP server. The PLA SYSTEM will be assigned an IP address by the DHCP
server running on the network. The network can be configured to assign either a static or
dynamic IP address to the PLA SYSTEM. Consult with the network administrator as to how
to determine the assigned IP address.
13B: Connecting to the PLA System
Within the web browser address bar type "http://nnn.nnn.nnn.nnn" where nnn.nnn.nnn.nnn
is the IP address assigned to the PLA SYSTEM unit by the network.
MODULE STATUS
NOTE: No username and password authentication is required to view the Module page.
1 / 2021
Rev. 02
Page 27 of 34