1: Introduction; 2: System Specifications - Panduit PLA-100 Operation Manual

© Panduit Corp. 2020

1: INTRODUCTION

The following are the instructions to setup and operate the Panduit Label Applicator Systems. The Panduit
Label Applicator System developed by Panduit Corporation provides customers with a means to apply
Panduit self-laminated labels to both rigid and flexible cables for high volume wire harnessing applications.
CAUTION: SAFETY GLASSES WITH SIDE SHIELDS MUST BE WORN AT ALL TIMES DURING
THE OPERATION, MAINTENANCE OR ADJUSTMENT OF THE LABEL APPLICATOR.
CAUTION: ELECTROSTATIC SENSITIVE DEVICE. DO NOT OPEN OR HANDLE EXCEPT AT A
STATIC FREE WORKSTATION.

2: SYSTEM SPECIFICATIONS

The Panduit Label Applicator System consists the following units: the self-laminating labels are available in
reels up to 4000 pcs.
1. PLA-100 Benchtop Label Applicator
2. PLA-H100 Applicator Head
3. PLA-T100X2400 Pressure Sensitive Adhesive Tether
4. PLA-R Label Rewinder
5. PLA-S English Unit Retractable Scale
6. PLA-SP Empty Media Spool
Refer to panduit.com for compatible printers, labels and thermal transfer ribbons
NOTE: Any substitutions may cause serious damage to the system and/or injury to the operator.
Rev. 02
PLA-100, PLA-H100
Page 3 of 34
1 / 2021