Table of Contents
Advertisement
2.11 Setting the E-mail Transmission Function
2-24
To use the e-mail transmission function, set the following parameters in addition to those
described in section 2.3, "Setting the Ethernet Interface."
• Basic Settings of E-mail Transmission
• SMTP* Server Name
Set the SMTP server name (up to 64 alphanumeric characters) or the IP address of
the SMTP server.
* Simple Mail Transfer Protocol
• Port Number
Set the port number to be used. The default setting is 25.
• Recipient 1
Set the recipient of the e-mail message using up to 150 alphanumeric characters.
You can specify multiple addresses. To specify multiple addresses, delimit the
addresses using commas.
• Recipient 2
Set the recipient of the e-mail message using up to 150 alphanumeric characters.
You can specify multiple addresses. To specify multiple addresses, delimit the
addresses using commas.
• Sender
Set the e-mail address that has been provided by the network administrator using
up to 64 alphanumeric characters. If omitted, the sender is set to the first address
specified as the recipient.
• Settings for Transmitting Alarm Information
• Recipient 1, Recipient 2
You can turn ON/OFF the function for each recipient.
• ON
Transmits e-mail messages to the recipient.
• OFF
Does not transmit e-mail messages to the recipient.
• Contents of the Transmitted Mail
• Add Inst. Data
• ON
The instantaneous values of all channels are included in the e-mail message.
• Off
The instantaneous values are not included in the e-mail message.
• Add Source URL (Uniform Resource Locator)
• ON
If the Web server function is specified on the XL100, the URL of the XL100 is
attached to the e-mail.
• OFF
The URL of the XL100 is not attached to the e-mail.
• Subject
Set the subject of the e-mail message using up to 32 alphanumeric characters.
The default setting is "(XL100)Alarm_summary."
• Header 1
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
• Header 2
Set the string to be attached to the e-mail message using up to 64 alphanumeric
characters.
IM XL100C-E
Advertisement
Table of Contents
