Table of Contents
Advertisement
Safety Precautions
2
When operating the instrument, be sure to observe the cautionary notes given below to
ensure correct and safe use of the instrument. If you use the instrument in any way other
than as instructed in this manual, the instrument's protective measures may be impaired.
Yokogawa Meters & Instruments Corporation is by no means liable for any damage
resulting from use of the instrument in contradiction to these cautionary notes.
The following safety symbols are used on the instrument and in this manual.
Danger! Handle with Care. This symbol indicates that the operator must refer to
an explanation in the User's Manual or this manual in order to avoid risk of injury
or death of personnel or damage to the instrument.
This symbol indicates DC voltage/current.
This symbol indicates AC voltage/current.
This symbol indicates ON (power).
This symbol indicates OFF (power).
WARNING
Indicates a hazard that may result in the loss of life or serious injury of the user
unless the described instruction is abided by.
CAUTION
Indicates a hazard that may result in an injury to the user and/or physical damage
to the product or other equipment unless the described instruction is abided by.
Note
Indicates information that should be noted in order to familiarize yourself with the
instrument's operating procedures and/or functions or gives supplementary information.
IM XL100C-E
Advertisement
Table of Contents
