Table of Contents
Advertisement
2.2
Connecting of the Ethernet Interface
When Connecting Only the XL100 and the PC
When Connecting to an Existing Network
2-2
Connect the LAN ports of the XL100 and the PC using a 10BASE-T or 100BASE-TX
LAN cable.
LAN port
LAN cable
If you are connecting the XL100 and the PC directly in a one-to-one configuration without
using a hub, use a cross LAN cable.
When connecting the XL100 or the PC to an existing network, communication
parameters such as the data rate and connector type must be matched. For details,
consult your system or network administrator.
Note
• Depending on the reliability of the network or the volume of network traffic, all the
transferred data may not be retrieved by the PC.
• Communication performance deteriorates if multiple PCs access a XL100
simultaneously.
• If the interface is not set to LAN, do not connect the LAN cable.
A LA R M
IM XL100C-E
Advertisement
Table of Contents
