Table of Contents
Advertisement
DIMMER CURVE CHART
Fuse Replacement
Unplug the unit from any power source it may be connected to. Once the power has been disconnected,
use a flat head screw driver to unscrew the fuse holder located next to the powerCON input. Remove
the bad fuse and replace with a new one, and screw the fuse holder back in.
Cleaning
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1.
Check that the DMX cables are connected properly and are wired correctly (pin 3 is "hot"; on
some other DMX devices pin 2 may be 'hot'). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Troubleshooting
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1.
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
3.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue,
dust, dew).
30
Advertisement
Table of Contents
