Table of Contents
Advertisement
Quick Links
FS600LED
User Instructions
9/13
FS600LED
Unpacking:
Thank you for purchasing the FS600LED by ADJ Prod-
ucts, LLC. Every FS600LED has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contact-
ing customer support.
Introduction:
The ADJ FS600LED is part of a continuing pursuit to
create high quality intelligent lighting. The FS600LED is a modern 60W
LED follow spot. It features a bright 60W LED, 8 colors, variable strobe
speed and dimming capabilities. This fixture is suitable for theaters,
studios, retail stores, and other similar locations.
Customer Support:
ADJ Products, LLC provides a customer sup-
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.adj.com for any comments or sugges-
tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
Pacific Standard Time.
Voice:
(323) 582-3322
Fax:
(323) 582-3108
E-mail:
support@adj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
ADJ Products, LLC - www.adj.com - FS600LED User Manual Page 2
Introduction
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ADJ FS600LED
Summary of Contents for ADJ FS600LED
- Page 1 You may also visit us on the web at www.adj.com for any comments or sugges- tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
-
Page 2: General Instructions
FS600LED Warranty Registration doors voids all warranties. The FS600LED carries a 3 year limited warranty. Please fill out the • During long periods of non-use, disconnect the unit’s main power. enclosed warranty card to validate your purchase. All returned service •... -
Page 3: Power Supply
The FS600LED can be controlled via DMX-512 protocol. The Figure 4 and PIN 3 (DMX +) of the last fixture. FS600LED has 3 DMX channels. The DMX start address is fixed on 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- channel 1. -
Page 4: Master Dimmer
This function also allows you to use your fixtures as spot lights. The FS600LED has 3 DMX channels. See page 8 for the DMX traits. 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller. -
Page 5: Photometric Chart
The equipment must be installed by a professional, and it must be installed in a place where it is out of the reach of people’s grasp. ADJ Products, LLC - www.adj.com - FS600LED User Manual Page 9 ADJ Products, LLC - www.adj.com - FS600LED User Manual Page 10... -
Page 6: Warranty
Warranty: 3 Year (1,095 days) product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because Auto Sensing Voltage: not properly maintained as set forth in the instruction manual.
Need help?
Do you have a question about the FS600LED and is the answer not in the manual?
Questions and answers