Factory Reset will restore the SocketScan to Factory Default settings
(configured as shipped).
Scan this barcode
Or
follow the steps below to manually reset the scanner:
1. Power ON the scanner.
2. Press and hold the scan button.
3. Tap the power button once while continuing to press the scan but-
ton.
4. Keep holding the scan button until you hear a beep and then re-
lease
(about15 seconds).
Your scanner will beep 5 times and power off.
Note: If you follow this sequence but release the scan button too
early, the Factory Reset will fail.
FACTORY RESET
Quickly press and re-
lease the power button
1
2
24