Socket SOCKETSCAN S740 User Manual page 30

STATUS INDICATORS (CONTINUED)
Vibrate
Vibrate
Command Barcodes are available on pages
LED, beep, and vibrate settings.
If you are using a scanner-enabled application, typically the
application provides settings for LED, beep, and vibrate settings.
Configuration Settings
Time after powering on Scanner
0-5 minutes
5 minutes
2 hours
Meaning
Data successfully scanned
44-48
Bluetooth mode
Discoverable and connectable
If connection is not made, scan-
ner powers off
If your scanner is connected
but not used, it will power off
in 2 hours. When scan button is
pressed the timer is reset.
to modify the
30