Connect Apple iOS device in Application Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore
application supports the scanner.
If you are using the scanner with an Apple iOS device and a
scanner-enabled Application that does not provide instructions how
to connect your scanner, please use the following steps.
1.
Power on the scanner. Make sure the scanner is discoverable
(unpaired). The Blue light should be blinking fast.
2. Scan the barcode to change the profile to Application Mode (MFI-
SPP).
3. Turn on Bluetooth on the Apple device. Go to Settings >
Bluetooth.
A Bluetooth Devices search will begin.
Use with iPad, iPod touch, and iPhones.
APPLICATION MODE
to confirm your scanner-enabled
15