Socket SOCKETSCAN S740 User Manual page 17

Application Mode (SPP) for Windows or Android 8.0 and later
(Auto Connect - No configuration required for Application pairing)
1. Power on the scanner. Make sure the scanner is discoverable
(unpaired). The Blue light should be blinking fast.
2. Scan the barcode to change the profile to Application Mode (SPP).
3. Turn on Bluetooth on the Android device. Go to Settings >
Bluetooth.
A Bluetooth Devices search will begin.
4. Tap Socket S740[xxxxxx] in the list of other devices found. After
a few seconds the status will change to "Connected" and the LED
will stop blinking and turn solid blue.
Note: The characters in brackets are the last 6 characters of the
Bluetooth Address.
5. Launch your scanner-enabled Application. The scanner will beep
once indicating that it is connected to the appropriate application.
Now you are ready to scan barcodes!
APPLICATION MODE
17