Factory Reset - Socket DURASCAN Series User Manual

Configures the scanner to factory defaults. The scanner powers off after
scanning this barcode.
Or, follow the Factory Reset button sequence:
1. Power ON the scanner.
2. Press and hold the scan button.
3. Tap the power button once while continuing to press the scan button.
4. Keep holding the trigger button until you hear a beep
(about15 seconds).
When you release the scan button you will hear 5 confirmation beeps then
the scanner will power off.
Note: If you follow this sequence but release the trigger button too early
(before 15 seconds and the beep) the Factory Reset will fail.
Watch Youtube video
1
2
for demonstration.

FACTORY RESET

Quickly press and release
the power button
25