RGBlink X3 User Manual page 39

Use shortcut key to operate fast and easily.
Take
Default display the Take window. Click the shortcut " ", it will hide the Take window,
and
click the shortcut again, it will pop-up the window.
The Take window is shown as the figure below:
Set the alpha time, and the adjustment range is 0~10S.
Slide the black scene switch to enable or disable the black function. Auto take on is the
default state. If select black scene and auto take on, the preview image will black or
seamless switch to LED display instantaneously.
Click "Cut" or "Take", the preview will be cut or seamless switch to LED display.
Fade Mode
Click the "Fade Mode", and pop-up window as follows:
Click "OK", and the system will synchronize the data, about 5 seconds later, it will enter
the interface as follows:
X3 User Manual
38