RGBlink X3 User Manual page 21

Output Setting
Click the "Output Setting", and pop-up window as follows:
Output: Click the drop down arrow after the format, and select the output resolution in the
pull-down menus according to actual need.
Custom: The width, height and frequency can be set if select "Custom" in "Format". Click
"Setting" to confirm.
Genlock: Enable or disable the genlock function by sliding the genlock switch. If select
"ON", the output resolution will be same with the resolution that selected. HDMI or BNC
can be selected in "Input Source" by sliding the switch.
X3 User Manual
20