Sartorius PMA.Power Operating Instructions Manual page 17

Configuring Text Length ("LONG" or "SHORT")
You can define the length of the operator guidance texts shown on the display�
Level 1 Level 2
SETUP
EXTRAS
Resetting the Scale: "RESET"
You can restore the factory settings in the scale�
Note:
If you have activated the password function, this feature is password-protected�
Level 1 Level 2
SETUP
RESET
Code Settings
Select the "CODES" menu item to have menu items identified by numeric codes rather than texts�
Level 1 Level 2
LANGUAGE
GERMAN
etc�
o CODES
Note:
Contact your local Sartorius office for a detailed list of the menu codes�
Level 3 Level 4
TEXTS
LONG
o SHORT
Level 3 Level 4
MENU
YES
o NO
§ Press the L key [ENTER]
§ Use the RS keys to select "EXTRAS"
§ Press the L key [ENTER]
§ Use the RS keys to select "TEXTS"
§ Press the L key [ENTER]
§ Use the RS keys to select "SHORT"
and press L to confirm
§ Press the c key (Clear) repeatedly
to exit the menu
§ Press the L key [ENTER]
§ Use the RS keys to select "RESET"
§ Press the L key [ENTER]
§ Use the RS keys to select "MENU"
§ Press the L key [ENTER]
§ Use the RS keys to select "YES"
§ Press the L key� Factory settings are
restored� "MENU" is displayed
§ Press the c key (Clear) repeatedly
to exit the menu
§ Press the R key to select LANGUAGE
§ Press the L key [ENTER]
§ Use the RS keys to select "CODES"
§ Press the L key [ENTER]; o indicates
the active setting
§ Press the c key (Clear) repeatedly
to exit the menu
17