Wireless Configuration For Macintosh Using The Brother Automatic Installer Application; Configuration With An Access Point That Supports Secureeasysetup - Brother HL-4040CN Network User's Manual
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-4040CN:
- Service manual (341 pages) ,
- User manual (202 pages) ,
- Network user's manual (87 pages)
Table of Contents
Advertisement
Wireless configuration for Macintosh
5
using the Brother automatic installer
application
Configuration with an access point that supports
SecureEasySetup™
Note
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
a
Make sure that the front cover is closed and the power cord is plugged in.
b
Turn on your printer and wait until the printer is in the Ready state.
c
Turn on your Macintosh
d
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL4040_4050_4070 icon on your
desktop. Double-click the Start Here icon. Select your printer and the language.
e
Click Install Printer Driver.
®
.
®
5
5
5
59
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
