Brother HL-4040CN Network User's Manual page 110
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-4040CN:
- Service manual (341 pages) ,
- User manual (202 pages) ,
- Network user's manual (87 pages)
Table of Contents
Advertisement
f
Press back.
Signal
This field displays the current wireless network signal strength; Strong, Medium, Weak or None.
a
Press the + or - button to select LAN. Press OK.
b
Press the + or - button to select WLAN. Press OK.
c
Press the + or - button to select WLAN Status. Press OK.
d
Press the + or - button to select Signal. Press OK.
e
The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
f
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
SSID
This field displays the current wireless network SSID.
a
Press the + or - button to select LAN. Press OK.
b
Press the + or - button to select WLAN. Press OK.
c
Press the + or - button to select WLAN Status. Press OK.
d
Press the + or - button to select SSID. Press OK.
e
The current wireless network SSID will be displayed.
f
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
Comm. Mode
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a
Press the + or - button to select LAN. Press OK.
b
Press the + or - button to select WLAN. Press OK.
c
Press the + or - button to select WLAN Status. Press OK.
d
Press the + or - button to select Comm. Mode. Press OK.
e
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
Control panel setup
10
103
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
