Brother HL-4040CN Network User's Manual page 33

i
Press OK to enable the wirelss LAN interface.
WLAN Enable?
On
Note
After you enable the wireless LAN interface, the wired LAN interface will be set to Off.
j
The printer will search for your network.
Searching SSID
Note
It will take a few tens of seconds to display a list of available SSIDs.
k
Select the SSIDs from the list using the + or - button. Press OK to select the SSID.
If the displayed SSID you you selected is instructed in infrastructure mode, go to step o.
If the displayed SSID you you selected is instructed in ad-hoc mode, go to step p.
If you want to add a new SSID, go to step l.
Select SSID&Set
Brother
Note
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to
step l.
l
Select <New SSID> using the + or - button, and press OK. Go to step m
Select SSID&Set
<New SSID>
m
Enter a new SSID using the + or - button. Press OK. Go to step n.
SSID:
_
n
Using the + or - button, select Infrastructure when instructed. Press OK. Go to step o.
If you select Ad-hoc, go to step p.
Mode Select
Ad-hoc
Note
For more information on Ad-hoc and Infrastructure mode, see Wireless network connection
example on page 17.
*
Configuring your printer for a wireless network (For HL-4070CDW)
3
26