m
Continue through the Wizard clicking Finish when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
Select the printer driver you wish to configure.
b
Select File and then Properties.
c
Click the Ports tab of the driver and click Add Port.
d
Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click
New Port....
e
The Standard TCP/IP Port Wizard will start. Follow f to i of Printer driver not yet
installed on page 86.
Other sources of information
See Chapter 2 of this User's Guide to learn how to configure the IP address of the printer.
Network printing from Windows
®
: basic TCP/IP Peer-to-Peer printing
6
6
6
87