Brother HL-4040CN Network User's Manual page 77

n
The wizard will search for wireless networks available from your printer. Choose the access point you
wish to associate the printer with, and then click Next.
Note
• "SETUP" is the default SSID of the printer. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the
printer and the access point are within range for wireless communication. Then, click Refresh.
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
o
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to q.
Wireless configuration for Macintosh
®
using the Brother automatic installer application
5
70