Brother HL-4040CN Network User's Manual page 73
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-4040CN:
- Service manual (341 pages) ,
- User manual (202 pages) ,
- Network user's manual (87 pages)
Table of Contents
Advertisement
f
Choose Manual and then click Next.
g
For configuration, it is recommended that you temporarily connect your Brother wireless device (your
printer) directly to a free port on your access point, hub or router using a network cable.
If you can temporarily connect with a network cable:
Choose I'm able to temporarily connect my device to my access point with a network cable and
then click Next. Go to h.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your
access point:
Choose I'm not able to connect my device to my access point with a network cable and then
click Next. Go to i.
Wireless configuration for Macintosh
®
using the Brother automatic installer application
5
66
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
