Confirm Your Wireless Network Setup Method; Configuration Using The Brother Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network - Brother HL-2270DW Network User's Manual

Configuring your machine for a wireless network (For HL-2270DW)

Confirm your wireless network setup method

There are three methods to configure your wireless network machine. Use the Brother installer application
on the CD-ROM (recommended), the one-push wireless setting mode or the PIN Method of
Wi-Fi Protected Setup. The setup process will be different depending on your network environment.
Configuration using the Brother installer application on the CD-ROM to
configure your machine for a wireless network
We recommend that you use the Brother installer application on the CD-ROM we have provided with the
machine. By using this application, you can easily connect your machine to your wireless network and install
the network software and printer driver which you need to complete the configuration of your machine for a
wireless network. You will be guided by the on-screen instructions until you are able to use your Brother
wireless network machine. You must know your wireless network settings before you proceed with this
installation.
Configuration using the Automatic Wireless mode (Recommended)
If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC
configure the machine easily without knowing your wireless network settings using the Brother installer
application.
1
Push Button Configuration
Configuration temporarily using a USB or network cable
You can temporarily use a USB cable or network cable to configure your Brother machine using this method.
1
) or AOSS™, you can
12
3
3
3
3
3